KA KOOPERASYON
Yon pwojè an Tiki, yo itilize bride nan tiyo gaz natirèl. Tout bride sa yo apwouve pa TUV.China Forging Centrifugal Pump Flanges, Weld Neck Flanges2. Flanj yo dwe pwodui pa fòje.
3. Materyèl yo dwe konfòm ak estanda ASTM A105, ASTM A694 F65 ak ASTM A694 F70 yo.
| 4. Bride ASTM A694 F65 ak ASTM A694 F70 yo dwe trempe ak tanpere. | 5. Sètifika tès materyèl ak rapò tretman chalè yo dwe disponib pou enspeksyon TPI yo. |
| 6. Bride WN yo dwe gen bout bizote dapre ASME B16.25. | 7. Valè tès chimik ak mekanik materyèl yo (enpak, sede, tansyon, elatriye) dwe dapre estanda ki gen rapò ak yo. |
| 8. Tout sifas yo dwe machin epi vèni ak yon lwil transparan pou anpeche rouye. | 9. Makaj la dwe gen ladan enfòmasyon sa yo, |
| • Dyamèt (eksp. 6”) | • Klas presyon (eksp. 150 LB) |
| • Klas Materyèl (eksepte ASTM A 105) | • Epesè miray (eksp. 4,78 mm) |
| Material | • Nòm pwodiksyon (ASME B16.5)10. Materyèl yo pa dwe gen okenn domaj sou sifas yo ak fant. Reparasyon soude yo entèdi fòmèlman. |
| 11. Tout bride yo dwe gen yon sifas sele ki leve (RF). Sifas sele a dwe Ra 3,2 – 6,3 µm (125 – 250 mic. inc.) dapre ASME B46.1.12. Materyèl yo dwe anbale pou anpeche domaj nan machinasyon an, ak sifas sele yo. | |
| 13. Tout dimansyon yo dwe nan tolerans pozitif (+). Tolerans negatif yo entèdi fòmèlman.14. Bizote flanj yo dwe fèt dapre ASME B16.25. | |
| 15. TPI ap verifye pwosesis fabrikasyon an nenpòt ki lè.16. TPI ka pran echantiyon nan nenpòt materyèl pou tès chimik/mekanik. | |
| 17. TPI a dwe revize rapò enspeksyon k ap antre a. | |
| AtikGwosè (pous) | |
| Klas Presyon | Materyèl |
| Pwa (mm) | Kote |
Kantite
Japonè
Koreyen
Arab
Ilandè
Grèk
Tik
Italyen
Danwa
Womenyen
Endonezyen
Tchèk
Afrikans
Syèd
Polonè
Bask
Katalan
Espéranto
Hindi
| Lao | Albanè | Amharik |
| Amenyen | Azerbaydjanyen | Belarisyen |
| Bengali | Bosnyen | Bilgaryen |
| Sebuano | Chichewa | Kòsik |
Kwoasyen
Olandè
Estonyen
Filipin
Finnish
Frisyen
Galisyen
Jòjyen
Gujarati
Ayisyen
Aoussa
Awayen
Ebre
Hmong
Ongwa
Islandè
Igbo
Javanè
Kannada
Kazak
Khmer
Kurd
Kirghiz
Latin
Letonyen
Lityanyen
| Item | Size (Inch) | Pressure Class | CS | Material | W.T. (mm) | Location | Qty. |
| S.O.R.F | 12 | 150LB | 20 | A105 | - | TANK FLANGES | 48 |
| S.O.R.F | 8 | 150LB | 20 | A105 | - | TANK FLANGES | 32 |
| S.O.R.F | 3 | 150LB | 20 | A105 | - | TANK FLANGES | 32 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 14 | TANK FLANGES | 2 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 5.54 | TANK FLANGES | 4 |
| S.O.R.F | 20 | 150LB | 20 | A105 | - | TANK FLANGES | 6 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 5.54 | TANK FLANGES | 8 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 14 | TANK FLANGES | 8 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 16 | TANK FLANGES | 8 |
| S.O.R.F | 3 | 150LB | 20 | A105 | - | TANK FLANGES | 24 |
| S.O.R.F | 20 | 150LB | 20 | A105 | - | TANK FLANGES | 6 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 5.54 | TANK FLANGES | 8 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 14 | TANK FLANGES | 16 |
| Item | Size (Inch) | Pressure Class | CS | Material | W.T. (mm) | Location | Qty. |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 2 |
| Flange, Weld Neck | 20 | 400LB | 62 | ASTM A694 F70 | 7.14 | PSM1 | 6 |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 4 |
| Flange, Weld Neck | 20 | 400LB | 62 | ASTM A694 F70 | 7.14 | PSM1 | 10 |
| Flange, Weld Neck | 12 | 400LB | 62 | ASTM A694 F70 | 4.78 | PSM1 | 4 |
| Flange, Weld Neck | 4 | 400LB | 62 | ASTM A694 F70 | 4.78 | PSM1 | 4 |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 25 |
| Flange, Weld Neck | 4 | 400LB | 62 | ASTM A694 F70 | 4.78 | PSM1 | 16 |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 2 |
| Flange, Weld Neck | 20 | 400LB | 62 | ASTM A694 F70 | 7.14 | PSM1 | 6 |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 4 |
| Flange, Weld Neck | 20 | 400LB | 62 | ASTM A694 F70 | 7.14 | PSM1 | 10 |
| Flange, Weld Neck | 12 | 400LB | 62 | ASTM A694 F70 | 4.78 | PSM1 | 4 |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 25 |
| Flange, Weld Neck | 4 | 400LB | 62 | ASTM A694 F70 | 4.78 | PSM1 | 16 |
| Flange, Weld Neck | 10 | 300LB | 51 | ASTM A694 F65 | 4.78 | PSB1 | 2 |
| Flange, Weld Neck | 6 | 300LB | 51 | ASTM A694 F65 | 4.78 | RABIGH | 4 |
| Flange, Weld Neck | 4 | 300LB | 51 | ASTM A694 F65 | 4.78 | RABIGH | 4 |
| Flange, Weld Neck | 18 | 300LB | 51 | ASTM A694 F65 | 4.78 | RABIGH | 2 |
| Flange, Weld Neck | 8 | 300LB | 51 | ASTM A694 F65 | 4.78 | RABIGH | 2 |
| Flange, Weld Neck | 8 | 300LB | 51 | ASTM A694 F65 | 4.78 | RABIGH | 2 |
Anglè
Franse
Japonè
Koreyen
Arab
Ilandè
Grèk
Tik
Italyen
Danwa
Womenyen
Endonezyen
Tchèk
Afrikans
Syèd
Polonè
Bask
Katalan
Espéranto
Hindi
| Lao | Albanè | Amharik |
| Amenyen | Azerbaydjanyen | Belarisyen |
| Bengali | Bosnyen | Bilgaryen |
| Sebuano | Chichewa | Kòsik |
Kwoasyen
Olandè
Estonyen
Filipin
Finnish
Frisyen
Galisyen
Jòjyen
Gujarati
Ayisyen
Aoussa
Awayen
Ebre
Hmong
Ongwa
Islandè
Igbo
Javanè
Kannada
Kazak
Khmer
Kurd
Kirghiz
Latin
Letonyen
Lityanyen
Liksanbou..
| Item | Size (Inch) | Pressure Class | CS | Material | W.T. (mm) | Location | Qty. |
| S.O.R.F | 12 | 150LB | 20 | A105 | - | TANK FLANGES | 48 |
| S.O.R.F | 8 | 150LB | 20 | A105 | - | TANK FLANGES | 32 |
| S.O.R.F | 3 | 150LB | 20 | A105 | - | TANK FLANGES | 32 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 14 | TANK FLANGES | 2 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 5.54 | TANK FLANGES | 4 |
| S.O.R.F | 20 | 150LB | 20 | A105 | - | TANK FLANGES | 6 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 5.54 | TANK FLANGES | 8 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 14 | TANK FLANGES | 8 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 16 | TANK FLANGES | 8 |
| S.O.R.F | 3 | 150LB | 20 | A105 | - | TANK FLANGES | 24 |
| S.O.R.F | 20 | 150LB | 20 | A105 | - | TANK FLANGES | 6 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 5.54 | TANK FLANGES | 8 |
| Flange, Weld Neck | 24 | 150LB | 20 | A105 | 14 | TANK FLANGES | 16 |
| Item | Size (Inch) | Pressure Class | CS | Material | W.T. (mm) | Location | Qty. |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 2 |
| Flange, Weld Neck | 20 | 400LB | 62 | ASTM A694 F70 | 7.14 | PSM1 | 6 |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 4 |
| Flange, Weld Neck | 20 | 400LB | 62 | ASTM A694 F70 | 7.14 | PSM1 | 10 |
| Flange, Weld Neck | 12 | 400LB | 62 | ASTM A694 F70 | 4.78 | PSM1 | 4 |
| Flange, Weld Neck | 4 | 400LB | 62 | ASTM A694 F70 | 4.78 | PSM1 | 4 |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 25 |
| Flange, Weld Neck | 4 | 400LB | 62 | ASTM A694 F70 | 4.78 | PSM1 | 16 |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 2 |
| Flange, Weld Neck | 20 | 400LB | 62 | ASTM A694 F70 | 7.14 | PSM1 | 6 |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 4 |
| Flange, Weld Neck | 20 | 400LB | 62 | ASTM A694 F70 | 7.14 | PSM1 | 10 |
| Flange, Weld Neck | 12 | 400LB | 62 | ASTM A694 F70 | 4.78 | PSM1 | 4 |
| Flange, Weld Neck | 24 | 400LB | 62 | ASTM A694 F70 | 7.92 | PSM1 | 25 |
| Flange, Weld Neck | 4 | 400LB | 62 | ASTM A694 F70 | 4.78 | PSM1 | 16 |
| Flange, Weld Neck | 10 | 300LB | 51 | ASTM A694 F65 | 4.78 | PSB1 | 2 |
| Flange, Weld Neck | 6 | 300LB | 51 | ASTM A694 F65 | 4.78 | RABIGH | 4 |
| Flange, Weld Neck | 4 | 300LB | 51 | ASTM A694 F65 | 4.78 | RABIGH | 4 |
| Flange, Weld Neck | 18 | 300LB | 51 | ASTM A694 F65 | 4.78 | RABIGH | 2 |
| Flange, Weld Neck | 8 | 300LB | 51 | ASTM A694 F65 | 4.78 | RABIGH | 2 |
| Flange, Weld Neck | 8 | 300LB | 51 | ASTM A694 F65 | 4.78 | RABIGH | 2 |
Pipe fittings are crucial components in the piping system, used for connection, redirection, diversion, size change, sealing or controlling the flow of fluids. They are widely applied in fields such as construction, industry, energy and municipal services.
Key Functions: It can perform functions such as connecting pipes, changing flow direction, dividing and merging flows, adjusting pipe diameters, sealing pipes, controlling and regulating.
Application Scope:
- Building water supply and drainage: PVC elbows and PPR tris are used for water pipe networks.
- Industrial pipelines: Stainless steel flanges and alloy steel elbows are used to transport chemical media.
- Energy transportation: High-pressure steel pipe fittings are used in oil and gas pipelines.
- HVAC (Heating, Ventilation, and Air Conditioning): Copper pipe fittings are used to connect refrigerant pipelines, and flexible joints are used for vibration reduction.
- Agricultural irrigation: Quick connectors facilitate the assembly and disassembly of sprinkler irrigation systems.
